Use the GITS method: Just change the names and the setting.

#2252
Well prices will obviously change, but the general direction is right.

#2253
You linked DDR4.

#2254
Is that an existing build?
Optimize for what?
Budget?

You need a Z270 mobo for overclocking.
Don't get a low profile cooler, it doesn't make any sense.
Read up on monitor features.

There's so many parts still being released until summer, it's not worth making an exact partlist already since it will change.

Well what is your budget now?
When do you want to build it?

Not sure what you're trying to do, do you want to overclock or not?
The SSD Plus is a fairly slow budget SSD, I'd get a better one.
Sadly the deal on the PSU has ended, I'll have to look for another one.
Do you want G-Sync/FreeSync/Lightboost?

Two options:
1. Training. You can either play with low sens and with enough practice you will be able to do 180s again or you just practice with a sensitivity that you can just about easily do a 180 with and try to get consistent aim with it.
2. Mixed movement. E.g. using wrist for aiming, using the forearm to do wide turns.

I have used low sens (>30cm/12in) with a light mouse (~100g) and I've used high sens (<10cm/4in) with the same mouse.
I have also used the same low sens with a heavy mouse (~200g) and have used high sens (~15cm/6in) with that heavy mouse as well.
I've also used accel.
I've even used negative and positive accel at the same time (neg to counter overflicking, pos in steps for intended fllicks).

You can get used to pretty much anything.
I mean going to a mouse with half the weight meant I ended up throwing it around a lot at first, but now a couple of years later it would take me weeks to get back to being able to do fast 180s with it.

I did not cut anything, this is an actual quote.

Now that's really weird, because it didn't when I benchmarked it. Well it did but it was an irrelevant portion that ran on >2 cores. Might be the config. Either way this shouldn't happen.

#393
Put it on just 4 and 6.

http://i.imgur.com/feOdBp2.png

Considering that TF2 produces full load on 1 core and about 30% on another (+30% on a 3rd for GPU driver) that would not have changed much.

Have you tried it with SMT disabled / core affinity set?

http://i.imgur.com/jKwkxhZ.jpg

http://i3.kym-cdn.com/photos/images/newsfeed/000/741/494/bcf.jpg

Yes.

https://www.youtube.com/watch?v=IxGtV0CmsT0

you are a master of your craft Setsul